It sounds like you're trying to turn off the Active Fuel Management feature on your 2019 Chevy Silverado 1500LD and the Edge Gas Evolution CS2 Performance Tuner # EP85350 is a great choice to accomplish this. This performance tuner comes with an easy to read color screen and 4 preset tunes for your specific vehicle that will improve throttle response, towing performance, and fuel efficiency. The Edge Gas Evolution CS2 plugs into the OBD-II port on your vehicle to reprogram your ECM and... view full answer...
When installing your Tekonsha Primus IQ # TK90160 with the # 3016 plug in adapter you will need to plug the adapter into the fuse box under the dash board- you should not need to remove and dash panels but you will need to remove the black cover on the box. I have linked installation videos of these parts on similar trucks that you can use as a guide when installing your brake controller. view full answer...
Since we haven't had a chance to install these in our shop, I've attached a couple pictures to show you where the Torklift Front Custom Frame-Mounted Camper Tie-Downs # TLC2217 install on the front of your truck. For the rear, you'll need part # TLC3214.
These are confirmed to fit your 2019 Chevy Silverado 1500 LD with the 6-1/2 Foot Bed with no board or step underneath truck bed and with a factory or aftermarket (other than Torklift) installed hitch.
For a set of Turnbuckles, I recommend... view full answer...
There aren't specifications on how close to the cab or tailgate that the Erickson Truck Bed Ladder Rack # EM07708 can be mounted; they can really be mounted anywhere since they basically wedge between the bed rail and the truck bed. This will make them easy to remove when you don't need to have them attached. view full answer...
The Tekonsha Plug-In Wiring Adapter # 3016 is the correct adapter to connect to the factory brake controller on your 2019 Chevrolet Silverado 1500 LD. This connector only has 4 pins versus the 14 pin harness # 3064-P that fits the redesigned 2019 Silverado 1500.
I have linked an installation video below that will show the installation of the Prodigy P3 # 90195 with the correct pigtail # 3016 on your Silverado. The factory connection is located behind the cover on firewall on your Silverado. view full answer...
Go To Results